ATN Corp PS22-3 Night Vision Front Sight

Shipping Weight:
3.00 LBS
Free Shipping
Current Stock:
Out of stock

Sorry but this item is currently unavailable.

Please check back at a later stage.

Product Description

**3rd Gen. Image Intensifier Tubes
Battle proven Generation 3 technology. Our Gen. 3 units provide exceptional quality image resolution under varying light conditions. The units with 3rd Gen. Image Intensifier Tubes have a typical resolution of 64 lp/mm and a typical Signal-to-Noise Ratio of 20.


The ATN PS22-3 is an attachment for a Daytime Riflescope with 1x Magnification that converts a scope into a high-quality very accurate Night Vision Weapon Sight.

The ATN PS22-3 mounts in front of a Daytime Scope. Re-zeroing of the scope is not required. The ATN PS22-3 comes standard with 7/8" weaver mount. There is also Adapter for ARMS quick release mount, optional Ring Adapters allow to mount unit onto the objective of the Day Scope (25...62mm diameter). The IR Illuminator can be mounted onto the optional Picatinny Rail.
This ingenious setup allows the shooter to go from day to night in less then 30 seconds without tools, without changes in eye relief and remain zeroed all around the clock.

The ATN PS22-3 Scope is a complex optical-electronic system. The Night Vision Device contains an Image Intensifier Tube assembly with an integrated high voltage power source and the three volt battery housing.



  • Easily changes daytime scope to Night Vision
  • Mounts in front of the daytime scope, no re-zeroing required
  • Multi-coated all-glass optics
  • Fast catadioptic front lens system
  • Large 21 mm output window
  • Lightweight and rugged
  • Comes with Quick Release Mount
  • Optional 7/8” weaver mount
  • Optional Scope Mounting System attaches the PS22 unit to the objective of the day scope (25...62 mm diameter)
  • Automatic brightness control
  • Resistance to severe conditions
  • Up to 60 hours of continuous operation with one Lithium battery
  • Limited Two-Year Warranty


Total Darkness IR System Yes
"SMART" Technology No
IIT Generation 3
Photocathode Type GaAs
Resolution 64 lp/mm
Signal to Noise Ratio 22 Typical
Figure of Merit 1600 Typical
MTTF - Mean Time Before Failure 10,000 hours
Magnification 1x
Lens System F1.44, 80 mm
Proshield Lens Coating Yes
FOV 13°
Exit Pupil 21 mm
Range of Focus 10 m to infinity
Diopter Adjustment No
Controls Direct
Remote Control Yes
Automatic Brightness Control Yes
Bright Light Cut-off Yes
Infrared Illuminator Detachable IR450
IR Indicator Yes
Low Battery Indicator No
Power Supply 1 x 3 V CR123A type battery
Battery Life 50 hrs
Reticle System No
Windage & Elewation Adjustment No
Environmental Rating Waterproof
MIL-STD-810 Yes
Operating Temperature -40 to +50 °C
Storage Temperature -50 to +70 °C
Dimensions 150x80x72 mm
Weight 0.64 kg / 1.4 lbs
Warranty 2 years


  • Instruction Manual
  • Lens Tissue
  • Packing box
  • Warranty card
  • Mil-Spec Hard Case
  • Two Lithium Batteries
  • IR450-B4
  • Quick Release Mount
  • Remote Control Unit
  • Lens Cap
  • Back Cap
  • Picatinny Rail
  • Light Supressor for the scopes with 42-63 mm lens diameter
  • Light Supressor for the scopes with 30-42 mm lens diameter
  • Light Supressor for Trijicon ACOG scopes

Find Similar Products by Category

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Customers Who Viewed This Product Also Viewed